| Model |
S10L5 |
|
|
| Size (IN.,CM) |
10, 25.4 |
| Impedance (OHMS) |
2 or 4 DVC |
| Max Rec Amplifier Power (WATTS PEAK/RMS)* |
900/450 |
| Sensitivity (dB 1w/1m) |
86.3 |
| Frequency Response (Hz) |
24-100 |
| Mounting Depth (IN.,CM) |
6-3/16, 15.7 |
| Mounting Cutout, Square (IN.,CM) |
9-5/16, 23.7 |
| Min Rec Sealed Box Volume (CU. FT., Liters) |
.66, 18.7 |
| Max Rec Sealed Box Volume (CU. FT., Liters) |
1.0, 28.3 |
| Min Rec Vented Box Volume (CU. Ft., Liters)** |
1.25, 35.4 |
| Max Rec Vented Box Volume (CU. Ft., Liters)** |
2.25, 63.8 |
*Assumes typical music program with minimal amplifier clipping; varies with enclosure size. See your KICKER dealer for details.
**Port Volume Excluded.
Due to continual developement, product, and specifications are subject to change without notice. Stillwater Designs and it's agents are not responsible for typographical errors.
- Affordable square performance
- SoloKon for strength and accuracy
- Stamped steel basket
- T cut top plate for magnetic field strength and cooling capability
- Polyimide (Kapton) coil former with Nomex reinforcement for high thermal capability
- Stitched and glued tinsel leads for high excursion
- Ribbed Santoprene surround
The Hype
Superiority has always been the guideline behind the award-winning technology of KICKER’s square subwoofer family. We’ve done it for years, but improving on a trendsetting yet affordable product like theSolo-Baric® L5 Subwoofer is no easy task.
The Solo-Baric L5 inherits all the same patented technology as the dominant L7 square woofer, with a hot new look and improved design for an even mightier performance.
The cone and basket take on a more macho feel in 2008. Like its ultimate SoloX Subwoofer big brother, the Solo-Baric L5 utilizes SoloKon™ technology, a vacuum-formed, ultra-rigid design with vented 360-degree back bracing used to push mass quantities of air. A Santoprene® surround handles the force of the L5’s motor and cone, and a rear foam gasket secures the stamped-steel basket to any given baffle. The logo-bearing steel basket with spring-loaded terminals, a stout magnet, and the logo-bearing protective front gasket also allow the L5 to take on any punishment given.
The L5’s motor structure also handles extreme power with high-temp dual voice coils covering a new heat-dispersing, solid pole piece, a poly-cotton semi-progressive spider with perimeter venting built into the spider landing, and long-lasting Spiralead™ tinsel leads. Altogether it’s a square-sub recipe for delivering superior bass.
The four sizes of Solo-Baric L5 are available in 2-Ohm or 4-Ohm DVC and deliver force from sealed- or vented-box applications.
|
Solo-Baric L5 
