| Model |
S8L5 |
|
|
| Size (IN.,CM) |
8, 20.3 |
| Impedance (OHMS) |
2 or 4 DVC |
| Max Rec Amplifier Power (WATTS PEAK/RMS)* |
600/300 |
| Sensitivity (dB 1w/1m) |
82.2 |
| Frequency Response (Hz) |
28-100 |
| Mounting Depth (IN.,CM) |
4-3/4, 12.1 |
| Mounting Cutout, Square (IN.,CM) |
7-1/4, 18.4 |
| Min Rec Sealed Box Volume (CU. FT., Liters) |
.33, 9.4 |
| Max Rec Sealed Box Volume (CU. FT., Liters) |
.75, 21.2 |
| Min Rec Vented Box Volume (CU. Ft., Liters)** |
.66, 18.6 |
| Max Rec Vented Box Volume (CU. Ft., Liters)** |
1.0, 28.3 |
*Assumes typical music program with minimal amplifier clipping; varies with enclosure size. See your KICKER dealer for details.
**Port Volume Excluded.
Due to continual developement, product, and specifications are
subject to change without notice. Stillwater Designs and it's agents
are not responsible for typographical errors.
- Affordable square performance
- SoloKon for strength and accuracy
- Stamped steel basket
- T cut top plate for magnetic field strength and cooling capability
- Polyimide (Kapton) coil former with Nomex reinforcement for high thermal capability
- Stitched and glued tinsel leads for high excursion
- Ribbed Santoprene surround
The Hype
Superiority has always been the guideline behind the award-winning
technology of KICKER’s square subwoofer family. We’ve done
it for years, but improving on a trendsetting yet affordable product
like the Solo-Baric® L5 Subwoofer is no easy task.
The Solo-Baric L5 inherits all the same patented technology as the
dominant L7 square woofer, with a hot new look and improved design for
an even mightier performance.
The cone and basket take on a more macho feel in 2008. Like its
ultimate SoloX Subwoofer big brother, the Solo-Baric L5 utilizes
SoloKon™ technology, a vacuum-formed, ultra-rigid design with
vented 360-degree back bracing used to push mass quantities of air. A
Santoprene® surround handles the force of the L5’s motor and
cone, and a rear foam gasket secures the stamped-steel basket to any
given baffle. The logo-bearing steel basket with spring-loaded
terminals, a stout magnet, and the logo-bearing protective front gasket
also allow the L5 to take on any punishment given.
The L5’s motor structure also handles extreme power with
high-temp dual voice coils covering a new heat-dispersing, solid pole
piece, a poly-cotton semi-progressive spider with perimeter venting
built into the spider landing, and long-lasting Spiralead™ tinsel
leads. Altogether it’s a square-sub recipe for delivering
superior bass.
The four sizes of Solo-Baric L5 are available in 2-Ohm or 4-Ohm DVC and deliver force from sealed- or vented-box applications.
|
Solo-Baric L5 
