| Model |
Solo-Baric L7 8 |
|
|
| Size (IN.,CM) |
8, 20.32 |
| Impedance (OHMS) |
2 or 4 DVC |
| Max Rec Amplifier Power (WATTS PEAK/RMS)* |
900/450 |
| Sensitivity (dB 1w/1m) |
83.6 |
| Frequency Response (Hz) |
28-100 |
| Mounting Depth (IN.,CM) |
4-3/4, 12.1 |
| Mounting Cutout, Square (IN.,CM) |
7-1/4, 18.4 |
| Min Rec Sealed Box Volume (CU. FT., Liters) |
.33, 9.4 |
| Max Rec Sealed Box Volume (CU. FT., Liters) |
.75, 21.2 |
| Min Rec Vented Box Volume (CU. Ft., Liters)** |
.66, 18.6 |
| Max Rec Vented Box Volume (CU. Ft., Liters)** |
1.0, 28.3 |
*Assumes typical music program with minimal amplifier clipping; varies with enclosure size. See your KICKER dealer for details.
**Port Volume Excluded.
Due to continual developement, product, and specifications are
subject to change without notice. Stillwater Designs and it's agents
are not responsible for typographical errors.
- SoloKon for strength and accuracy
- T cut top plate for high magnetic field strength
- Aluminum coil former (same as SoloX)
- Pole venting at cone brace
- Stitched and glued tinsel leads enable high excursion
- Ribbed Santoprene surround
The Hype
In 2008 the newest KICKER Solo-Baric® L7 Subwoofer remains
the most capable subwoofer on Earth. Without question, it’s the
best-looking, best-sounding square subwoofer available. And it’s
the only patented one that provides more cone, more air, and more
decibels.
KICKER engineers left it all on the table for this redesigned
Solo-Baric L7, taking cues from the award-winning original that debuted
as groundbreaking at the turn of the millennium, and then improving on
them. Let there be no doubt, it’s the most complete KICKER
subwoofer ever developed.
Available in 8-, 10-, 12-, and 15-inch models, the Solo-Baric L7 still
revolves around the breakthrough SoloKon™, the one-piece,
injection-molded cone with full-coverage back bracing that pushes more
air and creates louder bass than any like-size round subwoofer.
It’s good enough that KICKER uses SoloKon across the board as the
cornerstone for each subwoofer in the KICKER bass-making family.
SoloKon may be a rock star, but it’s the unshakeable motor
structure behind the scenes that propels it to the forefront. Minor
tweaks have given the motor an outstanding rep – dual high-temp
voice coils, poly-cotton semi-progressive spider, Spiralead™
tinsel-lead technology, highly-efficient UniPlate™
pole-piece/back plate, and a heat-reducing T-cut top plate for enormous
power handling. And it’s never been cooler with a new solid pole
piece that disperses more heat than ever before, and more venting near
the SoloKon back brace and spider landing.
The distinctive cast-aluminum basket with spring-loaded terminals wraps
around and protects these specialized inner workings, with the
Solo-Baric crest branded into the back plate.
The Solo-Baric L7 remains available in 2-Ohm or 4-Ohm DVC and conducts business from a sealed or vented box application.
|
Solo-Baric L7 
