| Model |
S15L5 |
|
|
| Size (IN.,CM) |
15, 38.1 |
| Impedance (OHMS) |
2 or 4 DVC |
| Max Rec Amplifier Power (WATTS PEAK/RMS)* |
1500/750 |
| Sensitivity (dB 1w/1m) |
87.8 |
| Frequency Response (Hz) |
18-100 |
| Mounting Depth (IN.,CM) |
8-5/8, 21.9 |
| Mounting Cutout, Square (IN.,CM) |
13-3/4, 34.9 |
| Min Rec Sealed Box Volume (CU. FT., Liters) |
1.5, 42.5 |
| Max Rec Sealed Box Volume (CU. FT., Liters) |
6.0, 169.9 |
| Min Rec Vented Box Volume (CU. Ft., Liters)** |
3.0, 85.0 |
| Max Rec Vented Box Volume (CU. Ft., Liters)** |
6.0, 169.9 |
Model
|
S12L5
|
|
|
Size (IN.,CM)
|
12, 30.5
|
Impedance (OHMS)
|
2 or 4 DVC
|
Max Rec Amplifier Power (WATTS PEAK/RMS)*
|
1200/600
|
Sensitivity (dB 1w/1m)
|
86.9
|
Frequency Response (Hz)
|
20-100
|
Mounting Depth (IN.,CM)
|
6-13/16, 17.3
|
Mounting Cutout, Square (IN.,CM)
|
11-1/16, 28.1
|
Min Rec Sealed Box Volume (CU. FT., Liters)
|
.88, 24.9
|
Max Rec Sealed Box Volume (CU. FT., Liters)
|
2.0, 56.6
|
Min Rec Vented Box Volume (CU. Ft., Liters)**
|
1.75, 49.6
|
Max Rec Vented Box Volume (CU. Ft., Liters)**
|
3.25, 92.1
|
Model
|
S10L5
|
|
|
Size (IN.,CM)
|
10, 25.4
|
Impedance (OHMS)
|
2 or 4 DVC
|
Max Rec Amplifier Power (WATTS PEAK/RMS)*
|
900/450
|
Sensitivity (dB 1w/1m)
|
86.3
|
Frequency Response (Hz)
|
24-100
|
Mounting Depth (IN.,CM)
|
6-3/16, 15.7
|
Mounting Cutout, Square (IN.,CM)
|
9-5/16, 23.7
|
Min Rec Sealed Box Volume (CU. FT., Liters)
|
.66, 18.7
|
Max Rec Sealed Box Volume (CU. FT., Liters)
|
1.0, 28.3
|
Min Rec Vented Box Volume (CU. Ft., Liters)**
|
1.25, 35.4
|
Max Rec Vented Box Volume (CU. Ft., Liters)**
|
2.25, 63.8
|
Model
|
S8L5
|
|
|
Size (IN.,CM)
|
8, 20.3
|
Impedance (OHMS)
|
2 or 4 DVC
|
Max Rec Amplifier Power (WATTS PEAK/RMS)*
|
600/300
|
Sensitivity (dB 1w/1m)
|
82.2
|
Frequency Response (Hz)
|
28-100
|
Mounting Depth (IN.,CM)
|
4-3/4, 12.1
|
Mounting Cutout, Square (IN.,CM)
|
7-1/4, 18.4
|
Min Rec Sealed Box Volume (CU. FT., Liters)
|
.33, 9.4
|
Max Rec Sealed Box Volume (CU. FT., Liters)
|
.75, 21.2
|
Min Rec Vented Box Volume (CU. Ft., Liters)**
|
.66, 18.6
|
Max Rec Vented Box Volume (CU. Ft., Liters)**
|
1.0, 28.3
|
*Assumes typical music program with minimal amplifier clipping; varies with enclosure size. See your KICKER dealer for details.
**Port Volume Excluded.
Due to continual developement, product, and specifications are
subject to change without notice. Stillwater Designs and it's agents
are not responsible for typographical errors.
- Affordable square performance
- SoloKon for strength and accuracy
- Stamped steel basket
- T cut top plate for magnetic field strength and cooling capability
- Polyimide (Kapton) coil former with Nomex reinforcement for high thermal capability
- Stitched and glued tinsel leads for high excursion
- Ribbed Santoprene surround
The Hype
Superiority has always been the guideline behind the award-winning
technology of KICKER’s square subwoofer family. We’ve done
it for years, but improving on a trendsetting yet affordable product
like the Solo-Baric® L5 Subwoofer is no easy task.
The Solo-Baric L5 inherits all the same patented technology as the
dominant L7 square woofer, with a hot new look and improved design for
an even mightier performance.
The cone and basket take on a more macho feel in 2008. Like its
ultimate SoloX Subwoofer big brother, the Solo-Baric L5 utilizes
SoloKon™ technology, a vacuum-formed, ultra-rigid design with
vented 360-degree back bracing used to push mass quantities of air. A
Santoprene® surround handles the force of the L5’s motor and
cone, and a rear foam gasket secures the stamped-steel basket to any
given baffle. The logo-bearing steel basket with spring-loaded
terminals, a stout magnet, and the logo-bearing protective front gasket
also allow the L5 to take on any punishment given.
The L5’s motor structure also handles extreme power with
high-temp dual voice coils covering a new heat-dispersing, solid pole
piece, a poly-cotton semi-progressive spider with perimeter venting
built into the spider landing, and long-lasting Spiralead™ tinsel
leads. Altogether it’s a square-sub recipe for delivering
superior bass.
The four sizes of Solo-Baric L5 are available in 2-Ohm or 4-Ohm DVC and deliver force from sealed- or vented-box applications.
|
Solo-Baric L5 
